Hey guys, let’s cut to the chase because if you’re reading this, you’re probably cringing every time you hit the brakes on your BYD—either your own daily driver, a fleet you manage, or a customer who just dropped their ride off at your shop, and that grinding noise is the last thing you want to hear. As a supplier that works exclusively on BYD Series brake discs, I hear this question at least a dozen times a week from techs, BYD owners, and even other parts vendors. Let’s break this down like we’re chatting over a post-work coffee, no fancy jargon—just what’s actually going on with those grinding noises, why it’s usually not a total disaster, and what we (as folks who make and supply these discs) see day in and day out. BYD Series Brake Discs

First, let’s get one thing straight: grinding isn’t normal brake noise—screechy high-pitched squeal is your brake pads working and letting you know they’ve got some bite, but grinding is metal-on-metal, plain and simple. Now, when that metal is coming from your BYD’s brake setup, there are a few super common culprits, most of which we deal with because we supply thousands of these discs every month, so we’ve seen every scenario.
Let’s start with the most rookie mistake, and it’s not even always the owner’s fault: damaged brake pads or pad hardware. Wait, you might be thinking, “I just got new pads last month!” Hear me out. A lot of generic aftermarket pads don’t play nice with BYD’s factory disc specs, right? We make our BYD Series discs to exactly match the OEM pad compound and thickness tolerances set by BYD’s engineers, but if someone slaps on cheap, off-brand pads, they might be too thick, their wear indicators are broken (those little metal tabs that scrape the disc when pads are done), or they’ve got loose shims. Shims are those thin metal strips that sit between the pad and caliper to damp vibration—if they fall out, the pad moves around, rubs against the disc’s edge instead of the friction surface, and boom, grinding. We had a customer last week with a 2022 BYD Dolphin who thought his pads were shot, but it was just a missing shim from a set of cheap pads he’d ordered online. Easy fix, but it sounds scary when it’s happening.
Next up, the disc itself—wait, but not because our discs are bad. Let’s get that out first: 9 times out of 10, when a BYD owner complains about their discs grinding, our OEM-spec BYD Series discs are working as designed. Most of the time it’s something that happens to the disc after it leaves our warehouse, like rust buildup. If your car sits for weeks at a time (hello, winter for folks in cold climates, or folks who leave their BYD parked at an office lot all week), the brake discs’ exposed metal surface rusts a little. Then when you hit the brakes, that rust is rough, and it grinds against the pad. It usually goes away after 2-3 hard stops, right? Wait, but if it’s not? That’s when we see surface rust that’s too heavy, or even rust that’s built up in the disc’s ventilation gaps (if you’ve got a vented rear disc on a newer BYD like the Seal, those gaps get crammed with road grime and rust if you don’t drive regularly). Another disc-related thing: scoring from wear debris. Brake dust, tiny metal shavings from pad wear, and road grit get stuck between the pad and disc over time. That debris is harder than both, so it acts like sandpaper, grinding tiny grooves in the disc and making that awful, persistent noise. We always tell our customers that a quick brake flush and disc surface grind (not resurface, but a light machine cut to smooth the friction layer) fixes that—just don’t wait too long, because deep grooves can warp the disc, which is a whole other headache.
Wait, what about the caliper? That’s the part that squeezes the pads against the disc, right? If the caliper is stuck, it doesn’t release fully when you let off the brake. So the pad is sitting pressed against the disc 24/7, wearing down both and grinding every time you drive. This is super common in older BYDs, or in areas where roads are salted in winter—salt causes caliper pins to seize up. We supply replacement caliper pins all the time because of this, and it’s such a cheap fix that turns a grinding nightmare into nothing. I’ve seen people replace full brake assemblies when all they needed was a $2 pin kit—don’t be that guy.
Now, let’s talk about something specific to BYD EVs, because that’s a huge part of their lineup now, and a lot of people miss this. EVs use regenerative braking way more than gas cars, right? So your friction brakes (the ones with the discs) are only used for hard stops or slowing down from high speeds. That means the disc and pads sit unused for way longer than they would in a gas BYD. So when you do hit the friction brakes, the disc has this thin layer of “static rust” that builds up because it’s not in use. Add to that the fact that many BYD EVs have heavier battery packs, so when the friction brakes do engage, they have more force applied. We’ve noticed that a lot of new BYD Dolphin and Atto 3 owners get confused because their grinding starts happening around 1,000 miles—turns out it’s just that break-in period for the brake pads and discs. Wait, but let’s clarify: break-in grind vs. bad grind. Break-in is usually light, goes away after a week or two of regular driving, happens mostly when you brake from high speeds. If it’s constant, happens when you’re going slow, that’s the stuff you need to check.
Also, let’s address a myth we see all the time: “my new BYD Series disc is grinding, so it’s defective.” Hold up. If you just installed our BYD Series disc and you’re getting grinding, first check if it’s mounted correctly. A lot of shops skip the step of cleaning the wheel hub surface before bolting the disc on. If there’s rust or old paint on the hub, the disc sits crooked, so it’s rubbing against the caliper or pads unevenly. That’s not a disc defect—that’s a bad installation. We’ve had shops send us whole boxes of “defective” discs only to find out they bolted them on a dirty hub. Moral of the story: prep the surface, don’t rush the install. Another installation mistake: over-torquing the lug nuts. Wait, no—wait, under-torquing? No, actually, both can cause warping, but if you torque the disc bolts wrong, it can bend just enough to rub. We include torque specs with every BYD Series disc we ship, and we can’t tell you how many techs ignore those because “I know how to torque bolts” and end up with a grinding disc a week later.
Now, when is grinding a sign you need a full disc replacement, not just a quick fix? Let’s be real here, no sugarcoating. If the grinding is accompanied by a pulsation in the brake pedal when you hit the brakes, that’s usually a warped disc. If you run your finger over the friction surface and it has deep grooves (deeper than the thickness of a dime), that’s metal-on-metal that’s eaten through the disc’s original thickness. If you’ve replaced pads twice in the last 6 months and the grinding keeps coming back, that’s likely the disc has worn unevenly, so even new pads won’t sit right. That’s where our BYD Series replacement discs come in—we make them to OEM thickness specs, with the same metallurgy as the original ones, so they don’t warp as fast and they work with BYD’s brake calibration, which is key for EVs especially.
Wait, let’s circle back to the EV thing again because it’s a game-changer for BYD owners. I talked to a BYD engineer last year at a trade show, and they told me that a lot of their EV brake noise complaints come from drivers who use regenerative braking at full strength 100% of the time. If you turn down regen a little bit, you engage the friction brakes more regularly, which keeps the discs from building up that static rust and the pads from glazing over. Glazing is when the pad surface gets smooth from heat, so it doesn’t bite the disc right, causing grinding and squealing. That’s another super common one for new BYD EV owners—they get used to one-pedal driving, forget to use the friction brakes, and now their discs are grinding. Small adjustment to driving style, huge fix.
Let’s run through a quick troubleshooting list for anyone dealing with this right now, no matter what BYD you drive: First, test if the noise goes away after 2-3 hard stops (say, 40 mph to a full stop, no panic stops). If yes, it’s surface rust—no big deal, keep driving. Second, check your brake pad wear indicator. If it’s scraping the metal, replace pads before it wears through and the disc gets damaged. Third, pop the wheel off and look at the disc: run your finger over the friction surface. If you feel deep grooves, or if the disc looks rusty in the ventilation gaps, that’s your next step. Fourth, check if the caliper releases fully when you let off the brake. If you can spin the wheel but it’s stiff, the caliper is seized—fix that immediately, because it will destroy your disc fast.
Now, as someone who supplies BYD Series brake discs, let me be clear: we don’t cut corners on our products. Every disc we make is tested to match BYD’s original performance specs, so you don’t get weird vibration, uneven wear, or compatibility issues that come with no-name parts. But we also know that most grinding noises aren’t the disc’s fault—they’re from small, avoidable things that happen during installation, driving, or basic maintenance. We’ve built our business around being the go-to for BYD parts because we get that folks don’t want to overpay for replacements, and they don’t want to waste time fixing a noise that could’ve been avoided.
Wait, I should mention one more weird edge case we see: road debris getting stuck in the caliper or between the disc and wheel. Last month we had a customer with a BYD Han who thought his disc was grinding, and it was just a small rock that got wedged between the outer edge of the disc and the wheel hub. Took two minutes to pop the wheel off and pull it out, no parts needed. Crazy how something that small can sound like your whole brake system is falling apart.
At the end of the day, grinding noise on your BYD’s brake discs isn’t something to ignore, but it’s also almost never a catastrophic failure right off the bat. Most of the time it’s a quick fix—shim replacement, caliper pin service, a light disc resurface, or just adjusting your driving style if you have an EV. If you do end up needing a new disc, we’ve got you covered: our BYD Series discs are built to exact OEM standards, fit every popular BYD model from the Dolphin to the Han, and we ship fast so you’re not stuck with that annoying noise for weeks.
If you’re a shop owner looking for a reliable brake disc supplier, or a BYD owner who’s tired of that grinding noise and needs the right parts to fix it, don’t hesitate to reach out to us for procurement and partnership discussions. We work with individual owners, independent shops, and even fleet managers, so we can hook you up no matter what you need. Just ask for the BYD Series brake disc team, and we’ll walk you through every step, no hidden fees, no confusing jargon.

Now, let’s wrap this up so you can go back to enjoying your quiet (well, quieter) BYD ride. The next time that grinding happens, don’t panic—run through the quick checks, and if it’s something more than just surface rust, you know exactly who to hit up for reliable, BYD-specific parts that won’t let you down.
Nissan Series Brake Discs References:
- BYD Global Engineering Team. (2021). OEM Brake System Specifications for Passenger EVs and Gasoline Models. BYD Technical Documentation.
- Brake Industry Association. (2022). Common Brake Noise Root Causes and Troubleshooting Guides. BIA Annual Maintenance Report.
- Automotive Parts Manufacturers Association. (2023). EV Brake Wear and Noise Trends. APMA EV Component Study.
Laizhou Dingzheng Machinery Co., Ltd.
As one of the most professional byd series brake discs manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to buy cheap byd series brake discs for sale here from our factory. We also accept customized orders.
Address: Luan Jia village, Tushan town, Laizhou city, Shangdong
E-mail: AMY@cndingzheng.com
WebSite: https://www.dingzhengbrake.com/